Description
The NetAlly LinkRunner AT 3000 Network & Cable Tester quickly verifies changes and troubleshoots network links. It has automated reporting and the same core functions as its predecessors (LinkRunner AT 1000 and 2000 models). The LinkRunner AT 3000 features a large touchscreen and in-depth AutoTest.
Test results can be automatically uploaded to the Link-Live collaboration, reporting, and analysis platform. Independent management plane via wired or Wi-Fi connection (with optional adapter) allows remote operation and result uploading independent of the network under test.
NetAlly LinkRunner AT 3000 Key Features
- Comprehensive AutoTest
Performs a fast 8-step validation of all aspects of network connectivity, including PoE, DHCP, and DNS, ensuring reliable operation. - Speed and Duplex Verification
Tests 10/100 Mbps and 1Gbps ethernet connections, with detection of multigigabit links (2.5G, 5G, 10Gbps) to ensure maximum efficiency. - Switch Discovery
Identifies nearest connected switch details, including name, port information, and VLAN configurations, using CDP/LLDP/EDP protocols. - Power over Ethernet
Validates PoE configurations up to 90W power delivery, utilizing TruePower™ technology under real load conditions. - Advanced Cable Diagnostics
Conducts comprehensive tests for copper and fibre cables, including length measurement, wire map, fault location, fibre optic link signal strength, and SFP diagnostics. - Wireless Capability
Includes optional WiFi/Bluetooth adapters for remote control* and connectivity, enabling enhanced flexibility. - Automated Reporting and Collaboration
Facilitates test result uploads, management, and remote control via the Link-Live™ analysis platform* for efficient collaboration and documentation. - Additional Tools
Locate cable endpoints with WireView adapters and analogue or digital tone generators.
Comparison Table
| Testing Feature/App | AT 3000 | AT 4000 | 10G |
| AutoTest & Profiles | ● | ● | ● |
| Switch Test | ● | ● | ● |
| Cable Test | ● | ● | ● |
| Ping/TCP Test | ● | ● | ● |
| Performance Test Reflector* | ● | ● | ● |
| Performance Test Controller + Peer* | ● | ||
| Discovery/Topology Mapping (in Link-Live™) | ● | ● | |
| Path Analysis | ● | ● | |
| Capture | ● | ● | |
| iPerf | ● | ● | |
| LANBERT™ Media Qualification* | ● | ● | ● |
| HTTP/FTP Response Time | ● | ● | |
| Remote Visibility & Control** | ● | ● | ● |
| WiFi Connectivity with Optional Adapter | ● | ● | ● |
| Periodic AutoTest | ● | ● | |
| Connect & Verify Link Speed/Duplex – 10M, 100M, 1G | ● | ● | ● |
| Connect & Verify Link Speed/Duplex – Multi-Gig/NBASE-T/10G | ● | ||
| Link Speed Detection – Multi-Gig, NBASE-T/10G | ● | ● | ● |
| Integrated Camera, Microphone, and Micro SD Card | ● | ||
| Included 1-Year AllyCare Premium Support | Optional | ● | ● |
NetAlly LinkRunner AT 3000 Specification
| Dimensions | 10.2 cm x 19.6 cm x 4.2 cm |
| Weight | 0.48kg |
| Battery | Rechargeable lithium-ion battery pack (3.63 V, 9.75 Ah, 36.39 Wh) |
| Battery Life | Typical run time is 9 hours Typical charge time is 3 hours |
| Display | 5.0 in color LCD with capacitive touch screen (720 x 1280 pixels) |
| Memory | Approximately 8 GB available for storing test results. |
| Host Interface | RJ-45 and SFP test port RJ-45 Cable Test Port USB Type-A Port and USB Type-C On-the-Go Port |
| Charging | USB Type-C 45W adapter: 100-240 Vac, 50-60 Hz; DC Output Power 15 V (3 A) |
| Supported IEEE Standards |
Wired: 802.3/ab/ae/an/bz/i/u/z PoE: 802.3af/at/bt, Class 0-8 and UPOE Fiber: 1000BASE-X, SFP SX/LX/ZX |
LinkRunner AT 3000 Environmental Specification
| Operating Temperature | 0°C to +45°C NOTE: The battery will not charge if the internal temperature of the tester is above 45°C. |
| Operating Relative Humidity (% RH without condensation) | 90% (10°C to 35°C) 75% (35°C to 45°C) |
| Shock and Vibrations | Meets the requirements of MIL-PRF-28800F for Class 3 Equipment |
| Safety | IEC 61010-1:2010: Pollution degree 2 |
NetAlly LinkRunner AT 3000 Included
- LinkRunner AT 3000 tester
- Power Supply with regional power plugs
- WireView Cable ID #1
- WireView Cable ID #1-#6 (Extended Test Kit Only)
- RJ-45 coupler
- 850nm multimode 1 Gbps SFP
- Holster (Extended Test Kit Only)
- Quick Start Guide
- Small soft case
