Olympus OmnIScan X3 Phased Array Flaw Detector’s powerful focusing capabilities supported by its larger element-aperture capacity enable you to fully exploit 64-element phased array probes and 128-element aperture TFM. Utilize its enhanced performance to meet the inspection challenges of thick and attenuative materials and expand your potential to develop new procedures for a wider range of applications.
Olympus OmnIScan X3 flaw detector is a complete phased array toolbox. Powerful tools, including total focusing method (TFM) imaging and advanced visualization capabilities, backed by its high image quality enable you to complete your inspection with greater confidence.
Olympus OmnIScan X3 feature
Benefit from 64-Pulser Phased Array
Exploit the full potential of 64-element phased array probes using the OmniScan X3 64 flaw detector to achieve improved resolution at the focal point.
Slide Right: Acquired using a 32-channel OmniScan X3 unit with a 64-element probe (5L64-A32 model), this S-scan is a high-quality image but the resolution reflects the fact that only the middle 32 elements could be used for the focal law.
Slide Left: Using a full 64-element aperture (5L64-A32 probe), the OmniScan X3 64 flaw detector provides better PA resolution at the focal point, enabling you to more easily distinguish indications that are close together or in a cluster.
Access Full 128-Element Aperture TFM
Made possible by new generation electronics, TFM imaging offers better focusing capabilities for smaller indications and an improved signal-to-noise ratio (SNR). With its 128-element aperture capacity, the OmniScan X3 64 model provides enhanced image clarity.
Slide Right: This TFM image was acquired with 64 elements of a 128-element probe (3.5L128-I4 model) using an OmniScan X3 32-channel model.
Slide Left: Here, the OmniScan X3 64 flaw detector enabled us to use the full 128-element aperture of our 3.5 MHz, 128-element I4 probe. Note the improved resolution and reduced background noise.
Improved Phased Array
Up to 3x as fast as the OmniScan MX2 flaw detector (max pulse repetition frequency)
Single TOFD menu for an accelerated calibration workflow
800% high amplitude range reduces the need to rescan
Onboard Dual Linear Array and Dual Matrix Array probe support accelerates setup creation.
Ease Corrosion Monitoring Using Phased Array
Using phased array to inspect corrosion offers many benefits, including excellent coverage and resolution. However, becoming proficient in phased array techniques can be challenging. The OmniScan X3 flaw detector combines advanced functions such as gate synchronization with thoughtfully designed software and simplified menus, so you can obtain accurate data more easily. Configure your setup quickly thanks to its A-scan synchronization processing and manual time-corrected gain (TCG).
Olympus OmnIScan X3 Specifications
Type
Multigroup, multimode ultrasonic flaw detector
Size (W × H × D)
335 mm x 221 mm x 151 mm (13.2 in. x 8.7 in. x 5.9 in.)
Weight
5.7 kg (12.6 lb) (with 1 battery)
Hard Drive Capacity
OmniScan X3 : Internal 64 GB SSD
OmniScan X3 64 : Internal 1TB SSD
extendable using an external USB drive
Storage Devices
SDHC™ and SDXC™ cards or most standard USB storage devices
Max Onboard File Size
25 GB
GPS
Yes (unless specified otherwise for some regions)
Alarms
3
Wireless Connection
Yes – wireless LAN dongle included in the package (model varies according to region)
PA Connectors
1 connector
UT Connectors
4 (2 channels P/R)
Certifications
ISO 18563-1:2015
ISO-22232-1:2020
Display
Type
TFT LCD with resistive touch screen
Size
269 mm (10.6 in.)
Resolution
1280 × 768 pixels
Number of Colors
16 million
Viewing Angles
Horizontal: −85° to 85°
Vertical: −85° to 85°
I/O Ports
USB 2.0
2 ports (one hidden behind the battery)
USB 3.0
1 port
Video Output
Video out (HDMI)
Memory Card
SDHC port
Communication
Ethernet
I/O Lines
Encoder
2-axis encoder line (quadrature quadrature direction), 3rd encoder ready
Digital Input
6 digital inputs, TTL
Digital Output
5 digital outputs, TTL
Acquisition On/Off Switch
Through the configuration of a digital input
Power Output Line
5 V nominal, 1 A (short-circuit protected), and 12 V output at 1 A
External DC Supply
DC-IN Voltage
15 VDC to 18 VDC (min. 50 W)
Connector
Circular, 2.5 mm pin diameter, center-positive
Battery
Type
Lithium-ion battery
Capacity
87 Wh
Number of Batteries
2
Life
5 hours using 2 batteries (hot-swap capable)
PA/UT Configuration
Bit Depth
16 bits
Maximum PRF
20 kHz
Frequency
Effective Digitizing Frequency
Up to 100 MHz
Display
Refresh Rate
A-scan: 60 Hz; S-scan: 20 Hz to 30 Hz
Envelope (echo-dynamic mode)
Yes: Volume-corrected S-scan (30 Hz)
A-Scan Height
Up to 800%
Synchronization
On Internal Clock
1 Hz to 10 kHz
External Pace
Yes
On Encoder
On 2 axes: from 1 to 65,536 steps
Olympus OmnIScan X3 Specifications Data Specifications
Processing
Maximum Number of A-Scan Data Points
Up to 16,384
Real-Time Averaging
PA: 2, 4, 8, 16
UT: 2, 4, 8, 16, 32, 64
Rectification
RF, full wave, half wave , half wave-
Filtering
PA channel (OmniScan X3): 8 low-pass, 6 band-pass, and 4 high-pass filters
PA channel (OmniScan X3 64): 9 band-pass and 7 high-pass filters
UT channel: 8 low-pass, 6 band-pass, and 4 high- pass filters (3 additional filters when configured in TOFD)
Video Filtering
Smoothing (adjusted to the probe frequency range)
Programmable TCG
Number of Points
32: One TCG (time-corrected gain) curve per focal law
Range
PA (standard): 40 dB per step of 0.1 dB
UT: 100 dB per step of 0.1 dB
$18,999.00Original price was: $18,999.00.$8,999.00Current price is: $8,999.00.Add to cart
Login
Register
Sign up for early Sale access plus tailored new arrivals, trends and promotions. To opt out, click unsubscribe in our emails.
Ask a question
Delivery & Return
Delivery
Global Express Shipping – Receive in as Little as 7 Days
We ship worldwide using premium express services to guarantee fast and secure delivery. Shipping times and costs may vary depending on your location and the quantity of your order. However, most shipments arrive within 7 days.
Shipping: We offer reliable and efficient shipping services to deliver your surveying equipment to your specified address. Shipping times and costs may vary depending on your location and the products ordered. You can find detailed shipping information and estimated delivery times during the checkout process.
Order Tracking: After we process and ship your order, we give you tracking information. This lets you see how your delivery is progressing. This allows you to stay informed about the status of your shipment and its expected arrival.
Returns
To be eligible for a return, the following conditions must be met:
The product must be in its original condition, unused, and in its original packaging.
You must make the return request within 30 days of receiving the product.
You must purchase the product directly from Kleinschmidt Surveying through our website at kleinschmidtsurveying.com.
Help
Please don’t hesitate to contact us if you have any further questions or concerns.
You must be logged in to post a review.